Brake Pedal Height: Notes
- Brake pedal height is measured from face of pedal pad to asphalt sheet under carpet. To adjust clearance, loosen stop light switch and lock nut on brake push rod. See Figure.
- Adjust pedal height by turning push rod. See BRAKE PEDAL HEIGHT TABLE for correct specification. After setting pedal height, tighten lock nut on push rod. Adjust stop light switch and tighten switch lock nut.
BRAKE PEDAL HEIGHT
| Application | In. (mm) |
|---|---|
| Land Cruiser (FJ60) | 7.1 (180) |
| Pickup & 4Runner | 5.7-5.9 (144-149) |
| Van | 5.8-6.2 (148-158) |