LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1983 >> Corolla Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [A] & 1.6L 4-CYL - VIN [A] >> Engine Specifications >> Piston/Pin/Ring Specifications

Piston/Pin/Ring Specifications

PISTONS, PINS & RINGS SPECIFICATIONS

Application In. (mm)
1.5L
Piston Clearance .004-.005 (.10-.12)
Pins
Piston Fit (1) Press Fit
Rod Fit Press Fit
Rings
Ring No. 1
End Gap .008-.016 (.20-.40)
Side Clearance .0016-.0031 (.04-.08)
Ring No. 2
End Gap .006-.014 (.15-.35)
Side Clearance .0012-.0028 (.03-.07)
Oil Ring
End Gap .004-.024 (.10-.60)
Side Clearance n/a
1.6L
Piston Clearance .004-.005 (.10-.12)
Pins
Piston Fit (2) Press Fit
Rod Fit Press Fit
Rings
Ring No. 1
End Gap .010-.014 (.25-.35)
Side Clearance .0016-.0031 (.040-.080)
Ring No. 2
End Gap .006-.012 (.15-.30)
Side Clearance .0012-.0028 (.030-.070)
Oil Ring
End Gap .008-.028 (.20-.70)
Side Clearance n/a
(1) Piston and pins are available only as a set.
(2) End gap for "TP" brand rings shown; for "Riken" brand, end gap is .008-.014" (.20-.35mm) for top ring, .006-.012" (.15-.30mm) for second ring and .012-.035" (.30-.90mm) for oil ring.
scientia non olet · About LEMON Manuals