LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1983 >> Corolla Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [A] & 1.6L 4-CYL - VIN [A] >> Engine Lubrication >> Oil Pump >> Removal

Oil Pump: Removal

  1. Raise and support vehicle. Drain engine oil. Remove timing covers and timing belt. Using oil pan prying tool (SST09032-00100), remove oil pan. DO NOT  use prying tool on pump side. DO NOT  damage pan flange.
  2. Remove oil strainer mount bolts and strainer. Remove dipstick and tube. Remove oil pump by tapping pump body with plastic hammer. Disassemble pump cover, drive gear, driven gear, oil seal and relief valve. See Figure.
scientia non olet · About LEMON Manuals