LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1981 >> Land Cruiser 2D Utility >> Repair and Diagnosis >> Electrical >> Body Electrical >> Switches, Gauges & Instrument Panels - TOYOTA >> Testing >> Oil Pressure Gauge

Oil Pressure Gauge

  1. Unplug connector at oil pressure sender. Connect a 3.4 watt test lamp between connector and ground. Turn ignition on. Bulb should come on and gauge needle should move.
  2. Connect one end of test lamp to sender terminal and other end to battery voltage. With engine running, test lamp should flash. Lamp should not light when engine is stopped.
    NOTE: Bulb may come on briefly when engine is stopped, but should not remain lit.
scientia non olet · About LEMON Manuals