LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1981 >> Land Cruiser 2D Utility >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2F 6-Cylinder >> Engine, Cylinder Head & Manifolds >> Intake & Exhaust Manifolds >> Removal

Intake & Exhaust Manifolds: Removal

  1. Disconnect battery and remove air cleaner. Disconnect throttle rod, choke rod, accelerator wire, vacuum line, and fuel line from carburetor.
    Fig 1: Manifold Tightening Sequence
    G09336471Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Disconnect magnetic valve wire from ignition coil terminal and remove carburetor assembly. Disconnect exhaust pipe from exhaust manifold. Remove manifold nuts, manifolds and gaskets.
scientia non olet · About LEMON Manuals