Cleaning & Inspection

Clean all parts in clean brake fluid. Inspect bore and piston for excessive wear or damage, replace defective parts.

Clean all parts in alcohol or clean brake fluid. Inspect parts for excessive wear or damage; replace defective parts. If torque plate pins are excessively worn or if pin weld parts are abnormally corroded, caliper must be replaced.

Clean all parts in clean brake fluid. Inspect pistons and cylinder bores for excessive wear, damage or corrosion; replace defective parts.

Clean all parts in clean brake fluid. Inspect bores and pistons for excessive wear or damage; replace defective parts.

Wash all parts in clean brake fluid. Inspect all parts for excessive wear, damage or corrosion; replace defective parts.