Steering Columns - TOYOTA - CELICA, Corona, CRESSIDA, Pickup & Supra - Tilt Wheel: Overhaul: Reassembly

Reassemble in reverse order of disassembly procedure and note the following; make sure all bushings, bearings, shims and bolts are not damaged or worn.

TIGHTENING SPECIFICATIONS

Application

Ft.Lbs. (mkg)

Castle Nut

11-21 (1.5-3.0)

Flexible Coupling

15-21 (2.0-3.0)

Steering Wheel Nut

22-28 (3.0-4.0)

Support Bracket

Pickup

11-15 (1.5-2.0)

All Others

14-22 (1.9-3.1)

Support Bracket-to-Column

11-15 (1.5-2.0)

Tilt Lever Retainer Bolt

11-15 (1.5-2.0)

Tilt Steering Support Stopper Bolt

6-8 (.8-1.2)

Universal Joint Clamp Bolt⁽¹⁾

15-21 (2.0-3.0)

⁽¹⁾	(1) - Tighten clamp bolt at steering gear on pickup models to 22-32 ft.lbs. (3.1-4.5 mkg).