LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1973 >> Pickup Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> TOYOTA Engines - (8R-C & 18R-C Engines) 4 Cylinder >> 1969-73 TOYOTA (8R-C & 18R-C Engines) 4 Cylinder >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Disconnect battery and remove air cleaner. Drain cooling system and remove radiator and heater hoses. Remove spark plug wires and vacuum lines. Remove fuel lines, throttle linkage and carburetor.
  2. Remove manifolds. See INTAKE & EXHAUST MANIFOLDS . Remove cylinder head cover and rocker shaft oil delivery pipe. Remove rocker shaft assembly.
    NOTE: Loosen rocker shaft bolts gradually working towards center.
  3. Remove timing chain gear from camshaft. Remove camshaft bearing caps and remove camshaft. Remove timing chain gear from timing chain. Remove cylinder head bolts, loosening in sequence gradually, in two or three steps. Lift and remove cylinder head.
scientia non olet · About LEMON Manuals