Torque Specifications
TIGHTENING SPECIFICATIONS
| Application |
Ft. Lbs. (mkg) |
| Cylinder Head |
79 (10.9) |
| Main Bearing Cap Bolts |
76 (10.5) |
| Connecting Rod Cap Nuts |
46 (6.3) |
| Camshaft Bearing Cap Bolts |
15 (2.1) |
| Timing Chain Cover |
13 (1.8) |
| Oil Pump Shaft-to-Timing Gear |
65 (9.0) |
| Chain Tensioner-to-Cylinder Block |
13 (1.8) |
| Crankshaft Pulley |
47 (6.5) |
| Rocker Shaft Support Bolts |
15 (2.1) |
| Camshaft Gear |
10 (1.4) |
| Intake & Exhaust Manifolds |
33 (4.6) |
| Oil Pan |
4 (0.5) |
| Cylinder Head Cover |
6 (0.8) |
| Flywheel-to-Crankshaft |
| |
8R-C |
46 (6.4) |
| |
18R-C |
55 (7.6) |
| Drive Plate-to-Crankshaft (Auto. Trans.) |
39 (5.4) |
| Clutch Cover-to-Flywheel |
| |
8R-C |
8 (1.1) |
| |
18R-C |
14 (1.9) |
| Oil Pump-to-Cylinder Block |
14 (1.9) |
| Crankshaft Rear Oil Seal-to-Cylinder Block |
14 (1.9) |