Engine Front Cover Oil Seal
With engine front cover removed, pry out old seal toward front side. Using suitable tool (09223-50010), drive seal into place. After installing new seal, coat seal lip lightly with multipurpose grease.
CAMSHAFT
| Engine | Journal Diam. In. (mm) | Clearance In. (mm) | Lobe Lift In. (mm) | |||
|---|---|---|---|---|---|---|
| 1969-71 | ||||||
| 8R-C | 1.3768-1.3778 (34.9707-34.9801) |
.001-.002 (.025-.051) |
.40 (10.16) |
|||
| 18R-C | 1.3768-1.3778 (34.9707-34.9801) |
.001-.002 (.025-.051) |
.317(1) (8.051) |
|||
|
||||||