LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1967 >> Crown 2.3L Eng, Not Available Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> TOYOTA Engines (M, 2M & 4M) 6 Cylinder >> 1965-73 TOYOTA (M, 2M & 4M Engines) 6 Cylinder >> Intake Manifold >> Removal

Intake Manifold: Removal

  1. Disconnect battery and drain coolant. Remove air cleaner and distributor cap. Remove radiator inlet hose and heater hoses. Disconnect temperature gauge sending wire and fuel line.
  2. Disconnect vacuum hoses at carburetor and manifold, and remove accelerator connecting rod. Remove automatic choke stove inlet hose and outlet pipe. Remove water by-pass hose under manifolds, and remove manifold with carburetor attached.
scientia non olet · About LEMON Manuals