LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1966 >> Crown Not Available Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> TOYOTA Engines - (3R-B & 3R-C Engines) 4 Cylinder >> 1965-70 TOYOTA (3R-B & 3R-C Engines) 4 Cylinder >> Intake Manifold Removal

Intake Manifold Removal

NOTE: Intake and exhaust manifolds are removed as an assembly.
  1. Remove air cleaner. Disconnect accelerator and choke control rods at carburetor. Disconnect PCV hose and fuel line at carburetor.
  2. Remove carburetor and disconnect exhaust pipe at exhaust manifold. Remove manifold retaining bolts and remove manifolds.
  3. To install, clean mating surfaces, use new gaskets and tighten bolts to specifications.
scientia non olet · About LEMON Manuals