Engine Front Cover & Oil Seal
Seal in front cover should be replaced whenever cover is removed. Pry seal out of cover toward front and install new seal with a suitable installing tool (09505-20110). Use new gasket and sealer when installing front cover and tighten bolts to specifications.
CAMSHAFT
| Engine | Journal Diam. | Clearance | Lobe Lift | ||
|---|---|---|---|---|---|
| All | .001-.0026" | ..... | |||
| Journal | |||||
| No. 1 | 1.8291-1.8297" | ||||
| No. 2 | 1.8192-1.8198" | ||||
| No. 3 | 1.8094-1.8100" | ||||
| No. 4 | 1.7996-1.8002" | ||||
| No. 5 | 1.7898-1.7904" | ||||