Weldment - Pivot - Inboard - 2nd Row Seat - LH - Remove And Replace: Install
- Position the LH 2nd row seat inboard pivot weldment into the vehicle, and then install the bolts (x3) that attach the pivot weldment to the body
26 N.m (19.2 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- 11 mm deep socket
- Install the 2nd row center pivot cover
- Install the RH 2nd row seat back. See Seat Back - 2nd Row - RH (Remove And Replace) .
- Install the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove And Replace) .
- Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove And Replace) .
- Install the LH and RH 2nd row seat outer bolsters. See Bolster - Outer - Seat - 2nd Row - LH (Remove And Replace) .
- Restore the driver and front passenger seats back to their original position.
- Raise all the windows and close all the doors.