Seat Back - 2nd Row - RH - Remove And Replace: Remove
- Open the RH doors and lower the RH windows.
- Move front passenger seat forward.
- Remove the RH 2nd row seat side bolster. See Bolster - Outer - Seat - 2nd Row - LH (Remove And Replace)
- Disconnect the RH 2nd row seat back harness electrical connector.
 Courtesy of TESLA, INC.
|
- Release the clip that attaches the RH 2nd row seat back harness to the pivot bracket.
 Courtesy of TESLA, INC.
|
- Release the RH 2nd row seat back pivot bushing from the pivot bracket.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Slightly tilt the RH 2nd row seat upward, and then pull the RH 2nd row pivot cast upward to release it from the pivot bracket.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Release the RH 2nd row seat back from the LH pivot, and then remove the seat back from the vehicle.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|