LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model S Plaid >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats -- Model S >> 2nd Row Seat Assemblies and Hardware >> Pivot Bushing - Seat Back - 2nd Row - LH - Remove And Replace >> Remove

Pivot Bushing - Seat Back - 2nd Row - LH - Remove And Replace: Remove

  1. Remove the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove And Replace) .
  2. Place the LH 2nd row seat back assembly upside down on a padded workbench.
  3. Use a paint pen to mark the orientation of the pivot components.
    G15082484Courtesy of TESLA, INC.
  4. Remove the E-clip that attaches the pivot cast to the seat assembly.
    WARNING: Use caution to avoid personal injury or damage to vehicle interior.
    G15082485Courtesy of TESLA, INC.
    G15082486Courtesy of TESLA, INC.
  5. Remove the pivot cast from the seat assembly.
    G15082487Courtesy of TESLA, INC.
    G15082488Courtesy of TESLA, INC.
  6. Rotate the LH 2nd row seat back pivot bushing counterclockwise to release it from the LH 2nd row pivot static collar.
    G15082489Courtesy of TESLA, INC.
    G15082490Courtesy of TESLA, INC.
    G15082491Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals