Bracket - Pivot - Outboard - 2nd Row Seat - RH - Remove And Replace: Remove

Remove the RH 2nd row seat back. See SEAT BACK - 2ND ROW - RH (REMOVE AND REPLACE) .
Disconnect the 2nd row seat cushion heat pad electrical connector.

Courtesy of TESLA, INC.
Release the clip that attaches the RH body harness to the rear seat back pivot mounting bracket.

Courtesy of TESLA, INC.
Remove the bolts (x2) that attach the RH 2nd row seat outboard pivot bracket to the vehicle, and then remove the bracket from the vehicle.
26 N.m (19.2 ft-lbs)

NOTE: Slightly pull the side trim to access the rear bolt.

Tip: Use of the following tool(s) is recommended:
- 11 mm socket
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.