LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model S Plaid >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Fittings -- Model S >> Underhood Trim >> Cover - Shock Tower - LH - Remove And Replace >> Remove

Cover - Shock Tower - LH - Remove And Replace: Remove

  1. Remove the rear underhood apron. See Underhood Apron - Rear (Remove And Replace) .
  2. Remove the LH underhood apron. See Underhood Apron - LH (Remove And Replace) .
  3. Release the clips (x3) that attach the washer hose to the LH shock tower cover.
    G15081385Courtesy of TESLA, INC.
  4. Release the clips (x4) that attach the LH shock tower cover to the vehicle, and then remove the cover from the vehicle.
    G15081386Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals