Applique - B-Pillar - LH - Remove And Replace: Notes
Last modified: 21/06/2023 14:54:41
NOTE:
See Personal Protection
to make sure wearing proper PPE when performing the below procedure.
Revision History:
- 2023-06-21: Switch the steps so that DAS Reset occurs directly before the Camera Connection Test.
WARNING:
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
WARNING:
Whenever a camera has been moved out of its original position (for example, a camera or windshield replacement), camera calibration data must be cleared using the vehicle touchscreen: Controls
> Service
> Camera Calibration
> Clear Calibration
.