Sensor - Position - Seat Track - 1st Row Seat - LH - Remove And Replace: Remove
- Open the LH front door and lower the LH front window.
- Move the LH front seat rearward.
- Raise the LH front seat to the highest position.
- Remove the screw and release the tabs (x3) that attach the LH 1st row seat, seat track position sensor to the seat track, and then release the sensor from the seat track.
2 N.m (1.5 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- Torx T20 socket
NOTE: The sensor is located on the LH front seat inner track. - Disconnect the LH 1st row seat, seat track position sensor electrical connector.