Switch - Hazard - Center Console - Remove And Replace: Remove
- Open the RH front door and lower the RH front window.
- Remove the phone dock assembly from the center console. See PHONE DOCK - CENTER CONSOLE - REMOVE AND REPLACE
.NOTE: It is not necessary to remove components from the phone dock assembly.
- Remove the screws (x5) that attach the center console hazard switch to the phone dock.
1.2 Nm (.9 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Torx T20 socket
- Release the clips (x3) that attach the hazard switch to the phone dock, and then remove the switch from the assembly.NOTE: Release the clips, and then rotate out of the phone dock.