LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model S Plaid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Body Interior >> Electrical System (3 Of 3) -- Model S >> Wipers And Washers >> Pump - Windshield Washer Reservoir - Remove And Replace >> Install

Pump - Windshield Washer Reservoir - Remove And Replace: Install

  1. Install the washer pump grommet to the new washer pump.
    G15092974Courtesy of TESLA, INC.
    G15092975Courtesy of TESLA, INC.
  2. Install the washer pump to the washer tank.
    G15092976Courtesy of TESLA, INC.
    G15092977Courtesy of TESLA, INC.
  3. Connect the washer hose to the washer pump.
    CAUTION: Be careful not to damage the washer pump when connecting the washer hose.
    G15092978Courtesy of TESLA, INC.
  4. Connect the washer pump electrical connector.
    G15092979Courtesy of TESLA, INC.
  5. Attach the washer hose to the tabs (x2) on the reservoir.
    G15092980Courtesy of TESLA, INC.
    G15092981Courtesy of TESLA, INC.
  6. Install the clips (x7) that attach the front portion of the LH front wheel house liner to the vehicle.
    G15092982Courtesy of TESLA, INC.
    G15092983Courtesy of TESLA, INC.
  7. Install the LH front wheel. See Wheel (Remove and Install) .
  8. Remove the vehicle from the lift.
scientia non olet · About LEMON Manuals