- Install the nut that attaches the horn assembly to the vehicle.
NOTE:
1x nut, 10 mm, 12 N.m
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Connect the electrical connector to the high tone horn.
CAUTION:
Push the red locking tab into the connector to engage the locking mechanism. DO NOT push down or pull up on the red locking tab.
 Courtesy of TESLA, INC.
|
- Connect the electrical connector to the low tone horn.
CAUTION:
Push the red locking tab into the connector to engage the locking mechanism. DO NOT push down or pull up on the red locking tab.
 Courtesy of TESLA, INC.
|
- Install the clips (x7) that attach the LH front wheel house liner to the vehicle.
 Courtesy of TESLA, INC.
|
- Install the LH front wheel. See Wheel (Remove and Install)
.
- Remove the vehicle from the lift.