LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model S Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Fittings -- Model S >> Underhood Trim >> Underhood Apron - Rear - Remove And Replace >> Install

Underhood Apron - Rear - Remove And Replace: Install

  1. Position the rear underhood apron into the vehicle, and then fasten the clips (x8) that attach the apron to the vehicle.
    G15081409Courtesy of TESLA, INC.
  2. Close the hood.
scientia non olet · About LEMON Manuals