LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model S Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body -- Model S >> Bumper/Fascia >> Bracket - Rear Wing - LH - Remove And Replace >> Install

Bracket - Rear Wing - LH - Remove And Replace: Install

  1. Position the LH rear wing bracket onto the vehicle, and then install the clips.
    NOTE: Push clips into the bracket, and then slightly rotate clockwise to secure.
    G15077151Courtesy of TESLA, INC.
    G15077152Courtesy of TESLA, INC.
  2. Install the rear fascia assembly. See Fascia Assembly - Rear (Remove And Install) .
scientia non olet · About LEMON Manuals