LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model S Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim (Model S) >> Pillar And Sill Trim >> Trim - B-Pillar - Upper - LH - Remove And Replace >> Install

Trim - B-Pillar - Upper - LH - Remove And Replace: Install

  1. Position the LH upper B-pillar trim onto the B-pillar, route the seatbelt through the trim, and then fasten the clips (x7) that attach the trim to the B-pillar.
    NOTE: Replace any damaged or broken trim clips.
    G15084470Courtesy of TESLA, INC.
  2. Fasten the clips (x6) that attach the top portion of the LH lower B-pillar trim to the B-pillar.
    G15084471Courtesy of TESLA, INC.
  3. Connect the LH front seat belt.
  4. Move the driver seat to its original position.
  5. Close the LH doors.