Bracket - A-Pillar - Upper - LH - Remove And Replace: Remove
- Open the LH front door and lower the LH front window.
- Remove the LH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove And Replace) .
- Remove the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace) .
- Remove the LH upper A-pillar trim. See Trim - A-Pillar - Upper - LH (Remove And Replace) .
- Release the electrical harness from the LH upper A-pillar trim bracket.
- Remove the bolts (x4) that attach the LH upper A-pillar trim bracket to the vehicle, and then remove the bracket from the vehicle.
Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- 2 in extension
- Ratchet/torque wrench