LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model S Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Doors, Windows And Latches -- Model S >> Closure Assist Mechanisms and Hinges >> Gas Strut - Hood - LH - Remove And Replace >> Remove

Gas Strut - Hood - LH - Remove And Replace: Remove

  1. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace) .
  2. Use a prop to attach the hood assembly in the open position.
  3. Release the clip that attaches the hood gas strut to the vehicle.
    G15079348Courtesy of TESLA, INC.
  4. Release the clip that attaches the hood gas strut to the hood.
    G15079349Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals