Rear Brake Rotors - Calipers and Pads - Brake Shield, Base, Rear LH - Mando - Remove And Replace: Remove
- Remove the LH rear hub. See HUB ASSEMBLY - REAR - LH - REMOVE AND REPLACE .
- Remove the bolts (x3) that attach the LH rear brake dust shield to the knuckle, and then remove the dust shield from the vehicle.
Tip: Use of the following tool(s) is recommended:
- Torx T30 socket
- Cordless Ratchet/Impact Driver
- 4 in extension
- Ratchet/torque wrench