Rear Brake Rotors - Calipers and Pads - Brake Shield, Base, Rear LH - Mando - Remove And Replace: Install

Position the LH rear brake dust shield to the vehicle, and then install the bolts (x3) that attach the dust shield to the knuckle.
8 N.m (5.9 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Torx T30 socket
- Cordless Ratchet/Impact Driver
- 4 in extension
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install the LH rear hub. See HUB ASSEMBLY - REAR - LH - REMOVE AND REPLACE .