Torque Specifications

TORQUE SPECIFICATIONS - REAR BRAKE ROTORS - CALIPERS AND PADS - BRAKE CALIPER, GREY, REAR-LEFT (REMOVE AND REPLACE)

Bolt that attaches the LH rear EPB harness bracket to the LH rear caliper	5 N.m (3.7 lbs-ft)	4 in extension Ratchet/torque wrench 10 mm socket	Reuse
Bolt that attaches the flexible brake hose to the brake caliper	42 N.m (31.0 lbs-ft)	Ratchet/torque wrench 11 mm 12-point deep socket	Reuse
Nut at the jounce hose bracket	16 N.m (11.8 lbs-ft)	3 in extension Ratchet/torque wrench 12 mm socket	Reuse
Bolts (x2) that attach the LH rear caliper bracket to the knuckle	83 N.m (61.2 lbs-ft)	Cordless Ratchet/Impact Driver 3 in extension External Torx E18 Ratchet/torque wrench	Replace