Front Brake Rotors - Calipers and Pads - Brake Shield, Base, Front LH - Remove And Replace: Remove
- Remove the LH front hub (dual motor). See FRONT KNUCKLE - HUB AND BEARING - HUB ASSEMBLY, DRIVEN - REMOVE AND REPLACE .
- Remove the bolts (x3) that attach the LH front brake dust shield to the knuckle, and then remove the dust shield from the vehicle.
Tip: Use of the following tool(s) is recommended:
- Torx T30 socket
- Cordless Ratchet/Impact Driver
- 2 in extension