Front Brake Rotors - Calipers and Pads - Brake Shield, Base, Front LH - Remove And Replace: Install
- Position the LH front brake dust shield to the vehicle, and then install the bolts (x3) that attach the dust shield to the knuckle.
8 N.m (5.9 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Torx T30 socket
- Cordless Ratchet/Impact Driver
- 2 in extension
- Install the LH front hub (dual motor). See FRONT KNUCKLE - HUB AND BEARING - HUB ASSEMBLY, DRIVEN - REMOVE AND REPLACE .