Brake Rotor - Front - LH - Measure Runout: Notes

Last modified: 24/05/2024 02:53:18

NOTE: See PERSONAL PROTECTION to make sure wearing proper PPE when performing the below procedure.

TORQUE SPECIFICATIONS - BRAKE ROTOR - FRONT - LH (MEASURE RUNOUT)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front rotor to the knuckle	5 N.m (3.7 lbs-ft)	Cordless 1/4 in Dr Ratchet 2 in extension 10 mm socket Ratchet/torque wrench	Reuse
Nuts that secure the brake rotor run out clamping plate to the LH front rotor	100 N.m (73.7 lbs-ft)	Brake Rotor Run Out Kit - 1064697-00-B Ratchet/torque wrench 21 mm deep socket Breaker bar	Reuse