Brakes - Brake Discs and Calipers - Front Brake Rotors - Calipers and Pads - Front Brake Rotors, LH - Remove And Replace: Remove

Remove the LH front wheel. See WHEEL ASSEMBLY - REMOVE AND INSTALL .
Remove the bolt that attaches the LH front brake hose bracket to the LH front knuckle.
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 4 in extension
- 10 mm socket
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Remove and discard the bolts (x2) that attach the LH front brake caliper to the LH front knuckle, remove the caliper from the knuckle, and allow the caliper to hang from an S-hook.
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- External Torx E18
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Remove the bolt that attaches the LH front brake rotor to the knuckle.
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 2 in extension
- 10 mm deep socket
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Remove the LH front rotor from the vehicle.
NOTE: Store the rotor face down to reduce likelihood of damage to the rotor face.

Courtesy of TESLA, INC.