Brakes - Brake Discs and Calipers - Front Brake Rotors - Calipers and Pads - Front Brake Rotors, LH - Remove And Replace: Install

Install the LH front brake rotor onto the vehicle.
Install the bolt that attaches the LH front brake rotor to the knuckle.
5 N.m (3.7 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 2 in extension
- 10 mm deep socket
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install new bolts (x2) that attach the LH front caliper to the LH front knuckle.
94 N.m (69.3 lbs-ft)

NOTE: Mark with a pen after installation.

Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- External Torx E18
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install the bolt that attaches the LH front brake hose bracket to the LH front knuckle.
5 N.m (3.7 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 4 in extension
- 10 mm socket
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install the LH front wheel. See WHEEL ASSEMBLY - REMOVE AND INSTALL .