Electromechanical Brake Booster - Brake Booster and Master Cylinder Assembly - Remove And Replace: Notes

Last modified: 14/06/2024 08:21:14

Fig 1: Brake Booster And Master Cylinder Assembly Component Location (LHD)

Courtesy of TESLA, INC.

NOTE: See PERSONAL PROTECTION to make sure wearing proper PPE when performing the below procedure.

Revision History:

2024-06-14: Added step to perform a road test and add correction code 00040100 as a separate activity to the Service Visit.
1060071-00-A Torque Wrench 1/4 in Dr Hexagon
1080568-00-A Fluid Catcher
1058696-00-A Wiper Arm Removal Tool
1076971-02-A Torque Wrench 1/4 in Dr. +Angle
1044206-00-A Wheel Trim Removal Tool
1080579-00-A Brake Bleeder
1080578-00-B Brake Bleed Adapter
1773092-00-A Diagnostic Harness Adapter - All Models
1137658-00-A Ethernet Cable, Diagnostics, Model 3
1705887-00-A 1/2" Dr. Electric Impact

TORQUE SPECIFICATIONS - ELECTROMECHANICAL BRAKE BOOSTER - BRAKE BOOSTER AND MASTER CYLINDER ASSEMBLY (REMOVE AND REPLACE)

Description	Torque Value	Recommended Tools	Reuse/Replace
LH bolt that secures the front harness bracket	9 N.m (6.6 lbs-ft)	2 in extension Ratchet/torque wrench 10 mm socket	Reuse
Nuts that attach the forward and rear brake line to the brake booster	16 N.m (11.8 lbs-ft)	12 mm 12 pt combination wrench 1/4 in to 3/8 in adapter 12 mm socket Ratchet/torque wrench	Reuse
Nuts that attach the booster to the bulkhead	16.5 N.m (12.2 lbs-ft)	Ratchet/torque wrench 13 mm socket 6 in extension	Replace