Underhood Trim - Cowl Screen Carrier Bracket LH - Remove And Replace: Remove
- Remove the LH hood hinge cover. See HOOD HINGES AND FITTINGS - HOOD HINGE COVER LH - REMOVE AND REPLACE
.
- Place a towel on the latch and close the hood partially.
 Courtesy of TESLA, INC.
|
- Release the clips (x2) of the LH cowl screen that attach the cowl screen to the bracket.
 Courtesy of TESLA, INC.
|
- Release the clip that attaches the bracket to the vehicle, and then remove the cover from the vehicle.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|