2nd Row Seat Covers And Pads - 2nd Row Seatback Foam, RH - Remove And Replace: Install

Install the RH 2nd row seat back foam to the seat back frame.

Courtesy of TESLA, INC.
Install the bolts (x2) that attach the RH 2nd row seat back handle to the seat back frame.
2 N.m (1.5 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Torx T25 socket
- Cordless Ratchet/Impact Driver
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install the RH 2nd row seat back cover. See 2ND ROW SEAT COVERS AND PADS - 2ND ROW SEAT BACK TRIM, RH - REMOVE AND REPLACE .
Install the RH 2nd row seat back latch release bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK LATCH RELEASE BEZEL - RH - REMOVE AND REPLACE .
Install the RH 2nd row escutcheon. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK CENTER ESCUTCHEON - REMOVE AND REPLACE .
NOTE: There are 2 clips in the RH 2nd row escutcheon.
Install the RH 2nd row seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
Install the RH 2nd row seat back. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - RH - REMOVE AND REPLACE .
Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
Install the RH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .