2nd Row Seat Covers And Pads - 2nd Row Seatback Foam, LH - Remove And Replace: Install
- Install the LH 2nd row seat back foam to the seat back frame.
- Install the clips (x2) that attach 2nd row center seat backrest handle to the seat back frame.
- Install the bolts (x2) that attach the LH 2nd row seat back handle to the seat back frame.
2 N.m (1.5 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Torx T25 socket
- Cordless Ratchet/Impact Driver
- Ratchet/torque wrench
- Install the LH 2nd row seat back cover. See 2ND ROW SEAT COVERS AND PADS - 2ND ROW SEAT BACK TRIM, LH - REMOVE AND REPLACE .
- Install the 2nd row armrest. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW ARMREST SYSTEM - REMOVE AND REPLACE .
- Install the 2nd row armrest closeout. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW TRIM - BLACK ARMREST CLOSEOUT ASSEMBLY - REMOVE AND REPLACE .
- Install the 2nd row center escutcheon. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK CENTER ESCUTCHEON - REMOVE AND REPLACE .
- Install the LH 2nd row seat back handle bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HANDLE BEZEL - LH - REMOVE AND REPLACE .
- Install the LH 2nd row seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
- Install the LH 2nd row seat back. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - LH - REMOVE AND REPLACE .
- Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
- Install the LH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .