LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats -- Model 3 >> 2nd Row Seat Assemblies and Hardware >> 2nd Row Seat Assemblies and Hardware - 2nd Row Seat Back Center Pivot Sleeve - Remove And Replace >> Install

2nd Row Seat Assemblies and Hardware - 2nd Row Seat Back Center Pivot Sleeve - Remove And Replace: Install

  1. Install the pivot sleeve onto the seat back assembly pivot pin and slide it inward until the tabs (x4) are fully seated.
    G16588921Courtesy of TESLA, INC.
  2. Install the 2nd row LH seat back assembly. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - LH - REMOVE AND REPLACE .
scientia non olet · About LEMON Manuals