2nd Row Seat Assemblies - 2nd Row Seatback - RH - Remove And Replace: Install
- Move the RH seat back assembly into the 2nd row area.
- Insert the inner pivot of the LH seat back assembly into the receptacle of the RH seat back assembly, move the assembly rearward and to the left, and then lower the RH seat back assembly hinge bracket onto the body studs.
- Install the nuts (x2) that attach the RH seat back hinge bracket to the body.
18 N.m (13.3 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- 2 in extension
- 13 mm socket
- Cordless 1/4 in Dr Ratchet
- Ratchet/torque wrench (for installation only)
- Connect the electrical harness to the heated seat connector for the RH 2nd row seat back assembly.
- Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
- Install the RH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .