LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats -- Model 3 >> 2nd Row Seat Assemblies and Hardware >> 2nd Row Seat Assemblies - 2nd Row Seat Cushion - Remove And Replace >> Install

2nd Row Seat Assemblies - 2nd Row Seat Cushion - Remove And Replace: Install

  1. Position the seat cushion in the vehicle.
    WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
    multimedia:A supplement to the article is available.
  2. Connect the electrical connectors of the seat cushion.
  3. Insert the seat belt buckles through the seat cushion holes.
  4. Slide the seat cushion inward, align the front guide tabs to the locking tabs, and then push the seat cushion into the tabs.
  5. Make sure that the seat cushion is fully seated with a push and pull test near the tabs.
  6. Move the driver seat and the front passenger seat to their original position.
  7. Raise all four windows and close all four doors.
scientia non olet · About LEMON Manuals