LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats -- Model 3 >> 2nd Row Seat Assemblies and Hardware >> 2nd Row Seat Assemblies - 2nd Row Bolster - LH - Remove And Replace >> Install

2nd Row Seat Assemblies - 2nd Row Bolster - LH - Remove And Replace: Install

  1. Install new bolster plastic bracket to the 2nd row seat side bolster.
    NOTE: The bracket is one time use only.
    WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
    multimedia:A supplement to the article is available.
    G16588937Courtesy of TESLA, INC.
  2. Align the bottom and side tabs, and then push inward to install the bolster.
  3. Unfold the LH 2nd row seat back so that it is upright and secured.
  4. Raise the LH rear window.
  5. Close the LH rear door.
scientia non olet · About LEMON Manuals