LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Mirrors >> Exterior Fittings -- Model 3 >> Underhood Trim >> Underhood Trim - Shock Tower Cover LH - Remove And Install >> Remove

Underhood Trim - Shock Tower Cover LH - Remove And Install: Remove

  1. Remove the rear underhood apron. See UNDERHOOD TRIM - REAR APRON ASSEMBLY - REMOVE AND REPLACE .
  2. Remove the cabin intake duct. See CABIN HVAC - HVAC, FRESH AIR GUTTER, ASSEMBLY - REMOVE AND REPLACE .
  3. Remove the access panel. See FRONT BUMPER FASCIA - ASSEMBLY, ACCESS PANEL - REMOVE AND REPLACE .
  4. Remove the underhood storage unit. See EXTERIOR FITTINGS - LUGGAGE COMPARTMENT TRIM - FRONT LUGGAGE STORAGE COMPARTMENT - FRUNK ASSEMBLY - REMOVE AND REPLACE .
  5. Release the clips (x3) that attach the LH shock tower cover to the vehicle, and then remove the cover from the vehicle.
    G16588585Courtesy of TESLA, INC.
    G16588586Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals