LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Mirrors >> Exterior Fittings -- Model 3 >> Underhood Trim >> Underhood Trim - Rear Apron Assembly - Remove And Replace >> Remove

Underhood Trim - Rear Apron Assembly - Remove And Replace: Remove

  1. Open the hood.
  2. Use the clip tool to release the clips (x14) that attach the rear underhood apron to the vehicle, and then remove the apron from the vehicle.
    G16588582Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals