Rear Bumper Fascia - Tail Lamp Bracket Assembly, LH - Remove And Replace: Remove
- Remove the rear fascia. See BUMPER AND FASCIA - REAR BUMPER FASCIA - REAR FASCIA - REMOVE AND INSTALL .
- Remove the bolt that attaches the rear center bracket to the vehicle.
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 10 mm socket
- Release the clip that attaches the rear center bracket to the LH taillight bracket.
- Remove the bolts (x2) that attach the LH taillight bracket to the vehicle.
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 10 mm socket
- Remove the LH taillight bracket.