Rear Bumper Fascia - Tail Lamp Bracket Assembly, LH - Remove And Replace: Install

Install the bolts (x2) that attach the LH taillight bracket to the vehicle.
4 N.m (2.9 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- 4 in extension
- Ratchet/torque wrench
- Torque Wrench Hexagon - 1060071-00-A
Courtesy of TESLA, INC.
Install the clip that attaches the rear center bracket to the LH taillight bracket.

Courtesy of TESLA, INC.
Install the bolt that attaches the rear center bracket to the vehicle.
4 N.m (2.9 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- 4 in extension
- Ratchet/torque wrench
- Hexagon - 1060071-00-A
Courtesy of TESLA, INC.
Install the rear lower fascia. See REAR BUMPER FASCIA - FASCIA - REAR LOWER ASSEMBLY, BASE - REMOVE AND REPLACE .