Rear Bumper Fascia - Rear Wing Bracket Assembly, LH - Remove And Replace: Remove
- Remove the rear fascia. See BUMPER AND FASCIA - REAR BUMPER FASCIA - REAR FASCIA - REMOVE AND INSTALL .
- Remove the bolts (x3) that attach the rear wing bracket to the vehicle.WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.multimedia:A supplement to the article is available.
Tip: Use of the following tool(s) is recommended:
- 8 mm socket
- Cordless hex driver