Rear Bumper Fascia - Rear Wing Bracket Assembly, LH - Remove And Replace: Install
- Install the bolts (x3) that attach the rear wing bracket to the vehicle.
3.5 N.m (2.6 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- 8 mm socket
- Ratchet/torque wrench
- 4 in extension
- Torque Wrench Hexagon - 1060071-00-A
- Install the rear fascia. See BUMPER AND FASCIA - REAR BUMPER FASCIA - REAR FASCIA - REMOVE AND INSTALL .